Best legibility thanks to OLED technology
freely programmable control units and OBD2 connection
FOUR analog inputs for additional sensors (oil temperature, oil pressure, fuel pressure)
freely definable warning thresholds per sensor
integrated shift light LED - freely configurable
In the displays themselves, values ??that have been exceeded are shown in red and values ??that have not been reached are shown in blue.
If a sensor is undercut/exceeded that is not currently displayed, the sensor setting determines what happens: popup, warning buzzer or just a small yellow triangle in the top right corner of the status bar.
Exceeding or falling below a sensor can be displayed in various ways:
1) Sensor is not in the current display: as soon as a sensor exceeds the set min or max warning value, an arrow appears at the top right (arrow up: max value exceeded, arrow down: min value exceeded)
2) Sensor is currently exceeding a value in the current display: Max exceeded (the number is red), Below Min (the number is blue)
3) Sensor is shown and has exceeded a threshold value in the past: a triangle appears next to the sensor (arrow up: max value exceeded, arrow down: min value exceeded)
4) If a sensor has been exceeded or fallen short of, you can see exactly which one in the sensor settings
The following control units are currently supported:- trijekt (Premium, Bee, trigifant) - trijekt plus with restrictions- Megasquirt 2 and 3- K-Data KDFI- UMC1/UMC2- Ecumaster EMU Black and Classic (with Can Bus Adapter)- van Kronenburg KMS MD35 and MP25 (with Can Bus Adapter)- VAG (VW/Audi/Seat)- Motorsport Electronics ME221/ME442 (Can Bus)- LinkECU- MaxxECU- Motec- SCS Delta- BMW E46 Can Bus Protocol- VW/Audi Can Bus Protocol- Haltech v2- OBD2 Can Bus (250/500kbit 11/29bit) vehicles from around 2008
with serial adapter:- VEMS- ME221 (discontinued! please use ME221v2)
If your control unit is not listed, please send me a short message: Contact
The MFD15 is delivered with:
If someone would like to integrate the MFD15 themselves and is fit in the field of CAD design, we offer a STEP/STL file here, which can be used as a dummy:
CAD_Dummy_MFD15.stl
CAD_Dummy_MFD15.stp